Plaster works cyclone
Author:荣田旋流器 Source:原创 Traffic:1624次 Time:2016-07-12
Summary:
Gypsum cyclone is mandatory to complete a centrifugal sedimentation particle size separation in a separate process, the various components of the gypsum cyclone have played a different role. Gypsum cyclone inlet into the slurry in addition to play the role, but also on the slurry into the cylindrical cavity drainage play the role.
Gypsum slurry cyclone processing is done within the cavity, the cavity of the cylindrical portion of the particles is considered as pre-separation zone, the particles in this region by the centrifugal force of different sizes are arranged to form a specific location. Gypsum cyclone cone portion is separated from the main area, its conical shape so that the slurry wall influence increased, the formation of the outer swirl cyclone, particle size separation.
Gypsum cyclone overflow and underflow outlet are located at the top and bottom of the plaster of the cyclone, is responsible for exporting the overflow and underflow stream to prevent blended particle size. Gypsum cyclone overflow and underflow orifice size is important, too big or too small, will cause the slurry volume cavity abnormalities caused by the separation is not complete.